| |
|
MS HEAD
|
NON DECODED MAG READER |
 |
| To be used with a MR4 or MSR equivalent
decoder, RJ45 and RJ48 cable's which are industry standard connectors
for MSR's. Supports ISO 7811 standard. Features include power indicator
light, bi-directional swiping, and a head life twice the industry
standard. Custom cables available for OEM configurations (minimum
quantities apply). Two year warranty. |
| MODEL NO. |
DESCRIPTION |
| MS-TRIPLE |
3 TRK non-decoded, TTL, RJ45, 100 mm, Ivory |
| MS-TRIPLE-BLK |
3 TRK non-decoded, TTL, RJ45 100 mm, Black |
|
| |
| Block Diagram and Output Signals |
 |
 |
| Timing Chart |
 |
NOTES:
1. 8 or 9 head flux reversals for low density configuration.
2. TIMEOUT of the CPD signal approx. 50msec after last Head Signal
transition.
3. The RDD is valid at 1.6us (min.) before negative edge of the RCP.
4. The low pulse width of RCP is approx. 70% of the bit time. |
|
| Card Specification |
| The cards which are used in JR-11X0 should be complied
with ISO 7810, 7811 and 7812. |
Track Position |
ISO
1 (IATA) |
ISO 2 ( ABA) |
ISO 3 (MINTS) |
Recording Density |
210
BPI |
75 BPI |
210 BPI |
Recording Capacity |
79
Characters (7bits) |
40 Characters (5bits) |
107 Characters
(5bits) |
Card Thickness |
0.76
mm ± 0.08 mm |
Electrical
Requirements |
Voltage and
Ripple |
+5 VDC (3.0 V ~ 5.5
V), Less then 50 mVp-p |
Current Standby |
Less than 1.5 mA (Single)
/ Less than 3.0 mA (Dual) |
Current Operating |
Less than 3.0 mA (Single) / Less than 6.0 mA (Dual) |
Output Levels |
High Level (0) : 3.5Vmin.
Low
Level (1) : 0.4Vmax. |
Interface |
Pin
No. |
Cable
Color |
Signal
Name |
JR 1120 |
|
1 |
Brown |
GND |
|
2 |
Gray |
STROBE |
|
3 |
White |
DATA |
|
4 |
Blue |
CARD PRESENT |
|
5 |
NC |
|
|
6 |
NC |
|
|
7 |
NC |
|
8 |
Red |
Vcc |
|
|
Connector for single track, 8 pin JAE IL-Y-8S – S15C3
and terminal – JAE-IL-Y-C3-A 1.5mm Contact Spacing
|
| |
RDD |
The DATA signal is valid while
the RCP is low. If the RDD signal is high, the bit is zero.
If low, the bit is one |
RCP |
The RCP signal indicates that
RDD is valid. The RDD should be loaded by the user when the
RCP signal goes low. |
CPD |
CPD signal will go to low after
the 8 or 9 th flux reversal and will return to high when the
20msec approx. was elapsed. |
|
| Operational Requirements |
Installation |
Indoors only |
Performance |
10 – 120Cm/sec |
Head Reliability |
Standard 500,000 passes (min) |
Error Rate |
Less than 0.5% |
|
| |
| Environmental Requirements |
Temperature Range |
-20 ℃ ~ 50 ℃ (Working)
/ -30 ℃ ~ 70 ℃ (Storage) |
Humidity |
90% relative humidity to 40 ℃ .
Non condensing |
Shock Resistance |
10 ms at 10G along the 3 axes |
Vibration |
Amplitude 2mm within 2G or less,
10 ~ 55Hz X, Y, Z directions for 30min |
|
| |
| Mechanical Requirements |
Weight |
25 g |
Connector (STD) |
Molex 51021-0500 (JSR-1120, 1130,
1140) |
Cable Length |
86 mm * Customized
connector are also available.
|
Dimension |
43.0 mm (D) x 22.0 mm (W) x 23.0
mm (H) |
|
| |
| |
| |
| |
